View PS2801C-1-F3-A_1361989.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

description t he ps2801c-1 and ps2801c-4 are optically coupled isolat ors containing a gaas light emitting diode and an npn silicon phototransistor in a plastic sso p for high density applications to rea lize an excellent cost performance. t h is package has shield effect to cut off ambient light. features ? high isolation voltage (bv = 2 500 vr.m.s.) ? small and thin package (4, 16-pin ssop, pin pitch 1.27 mm) ps2801c-1 ps2801c-4 pin connection (top view) 1. anode 2. cathode 3. emitter 4. collector 43 12 12 34 56 78 16 15 14 13 12 11 10 9 anode cathode emitter collector 1. 3. 5. 7. 2. 4. 6. 8. 9. 11. 13. 15. 10. 12. 14. 16. ? v ce o : 80 v ? ordering number of tape product: ps 2801c-1-f 3, f 4 , ps2801c-4-f 3, f 4 ? pb-f ree product ? safety standards ? ul approved: f ile no. e72422 ? din en60747-5-2 (vde0884 pa rt2) approved (option) applications ? programmable logic controllers ? measuring instruments ? pow e r supply ? hy brid ic 2006 photocoupler ps2801c-1,ps2801c-4 high isolation voltage ssop photocoupler ? nepoc series ? document no. pn10610ej01v0ds (1st edition) date published may 2006 ns cp(k)
package dimensions (unit: m m ) m 0.12 0.40.1 1.27 2.00.1 0.10.1 ps2801c-1 ps2801c-4 4.4 7.00.3 0.50.3 0.15 +0.10 ?0.05 2.70.3 10.30.3 4.4 7.00.3 0.50.3 0.15 +0.10 ?0.05 1.27 2.0 +0.3 ?0.2 0.10.1 m 0.12 0.40 +0.10 ?0.05 4 3 1 2 16 9 1 8 marking example 1c 603 assembly lot 6 03 week assembled year assembled (last 1 digit) last number of type no. : 1c ps2801c-1 country assembled assembly lot no. 1 pin mark ps2801c-4 ps2801c-4 nl603 *1 6 03 year assembled (last 1 digit) l n rank code in-house code (l: pb-free) week assembled *1 : pb-free data sheet pn10610ej01v0ds 2 ps2801c-1,ps2801c-4
ordering information part number order number solder plating specification packing style safety standard approval application part number *1 ps2801c-1 ps2801c-1-a pb-free 50 pcs (tape 50 pcs cut) standard products ps 2801c-1 ps2801c-1-f3 PS2801C-1-F3-A embossed tape 3 500 pcs/reel (ul approved) ps2801c-1-f4 ps2801c-1-f4-a ps2801c-4 ps2801c-4-a magazine case 45 pcs ps 2801c-4 ps2801c-4-f3 ps2801c-4-f3-a embossed tape 2 500 pcs/reel ps2801c-4-f4 ps2801c-4-f4-a ps2801c-1-v ps2801c-1-v-a 50 pcs (tape 50 pcs cut) din en60747-5-2 ps 2801c-1 ps2801c-1-v-f3 ps2801c-1-v-f3-a embossed tape 3 500 pcs/reel (vde0884 part2) ps2801c-1-v-f4 ps2801c-1-v-f4-a approved (option) ps2801c-4-v ps2801c-4-v-a magazine case 45 pcs ps 2801c-4 ps2801c-4-v-f3 ps2801c-4-v-f3-a embossed tape 2 500 pcs/reel ps2801c-4-v-f4 ps2801c-4-v-f4-a *1 for the application of the safety st andard, following part number should be used. data sheet pn10610ej01v0ds 3 ps2801c-1,ps2801c-4
absolute maximum ratings (t a = 25c, unless otherwise specified) parameter symbol ratings unit ps2801c-1 ps2801c-4 diode forward current (dc) i f 30 ma/ch reverse voltage v r 6 v power dissipation derating ? p d / c 0.6 0.8 mw/ c power dissipation p d 60 80 mw/ch peak forward current *1 i fp 0.5 a/ch transistor collector to emitter voltage v ceo 80 v emitter to collector voltage v eco 5 v collector current i c 30 ma/ch power dissipation derating ? p c / c 1.2 mw/ c power dissipation p c 120 mw/ch isolation voltage *2 bv 2 500 vr.m.s. operating ambient temperature t a ? 55 to +100 c storage temperature t stg ? 55 to +150 c *1 pw = 100 s, duty cycle = 1% *2 ac voltage for 1 minute at t a = 25c, rh = 60% between input and output pins 1-2 shorted together, 3-4 shorted together (ps2801c-1). pins 1-8 shorted together, 9-16 shorted together (ps2801c-4). data sheet pn10610ej01v0ds 4 ps2801c-1,ps2801c-4
electrical characteristics (t a = 25c) p a r a m e t e r s y m b o l c o n d i t i o n s m i n . ty p . m a x . u n i t d i o d e f o r w ard v o l t a g e v f i f = 5 ma 1.2 1.4 v r e v e r s e c u r r e n t i r v r = 5 v 5 a t e r m i n a l c a p a c i t a n c e c t v = 0 v, f = 1.0 mhz 10 pf transistor collector to emitter dark current i ceo v ce = 80 v, i f = 0 ma 100 na coupled current transfer ratio (i c /i f ) *1 c t r i f = 5 ma, v ce = 5 v 50 400 % collector saturation voltage v ce (s at) i f = 10 ma, i c = 2 ma 0.13 0.3 v i s o l a t i o n r e s i s t a n c e r i-o v i-o = 1.0 kv dc 1 0 11 ? i s o l a t i o n c a p a c i t a n c e c i-o v = 0 v, f = 1.0 mhz 0.4 pf r i s e time *2 t r v cc = 5 v, i c = 2 ma, r l = 100 ? 5 s f a l l ti me *2 t f 7 *1 ct r rank ps2801c-1 n : 50 to 400 (%) p : 150 to 300 (%) l : 100 to 300 (%) m : 100 to 400 (%) ps2801c-4 n : 50 to 400 (%) m : 100 to 400 (%) *2 t e st circuit for sw itching time v cc v out r l = 100 ? i f 50 ? pulse input pw = 100 s duty cycle = 1/10 data sheet pn10610ej01v0ds 5 ps2801c-1,ps2801c-4
typical characteristics (t a = 25c, unless otherw ise specified) 100 80 60 40 20 0 ps2801c-1 ps2801c-4 0.8 mw/ ?c 0.6 mw/ ?c 0 2 5 5 0 7 5 100 125 ambient temperature t a (?c) diode power dissipation p d (mw) diode power dissipation vs. ambient temperature 200 160 120 80 40 0 ps2801c-1 ps2801c-4 1.2 mw/ ?c 0 2 5 5 0 7 5 100 125 ambient temperature t a (?c) transistor power dissipation p c (mw) transistor power dissipation vs. ambient temperature 100 1.5 1.4 1.3 1.2 1.1 1.0 0.9 0.8 0.7 50 10 5 1 0.5 0.1 0?c ?25?c ?55?c +60?c +25?c t a = +100?c 0.05 forward voltage v f (v) forward current i f (ma) forward current vs. forward voltage 30 25 20 15 10 5 0 024 68 1 0 i f = 10 ma 5 ma 2 ma 1 ma collector to emitter voltage v ce (v) collector current i c (ma) collector current vs. collector to emitter voltage ambient temperature t a (?c) collector to emitter dark current i ceo (na) collector to emitter dark current vs. ambient temperature 10 000 1 000 100 10 1 0 2 5 5 0 7 5 100 24 v 70 v v ce = 80 v collector saturation voltage v ce(sat) (v) collector current i c (ma) collector current vs. collector saturation voltage 10 1 0.1 0 0.2 0.4 0.6 0.8 1.0 i f = 10 ma 5 ma 2 ma 1 ma ctr = 200% ctr = 250% ctr = 250% remark t he graphs indicate nominal characteristics. data sheet pn10610ej01v0ds 6 ps2801c-1,ps2801c-4
100 10 1 0.1 10 100 1 000 10 000 t f t r t d t s i c = 2 ma, v cc = 5 v, ctr = 228% switching time t ( s) load resistance r l ( ?) switching time vs. load resistance 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 ? 50 ?7 5 ? 25 0 2 5 7 5 50 100 ambient temperature t a (?c) normalized current transfer ratio ctr normalized current transfer ratio vs. ambient temperature normalized to 1.0 at t a = 25?c, i f = 5 ma, v ce = 5 v ctr = 250% 80% 400 300 200 100 0 0.01 0.1 1 1 0 100 v ce = 5 v , n = 3 forward current i f (ma) current transfer ratio ctr (%) current transfer ratio vs. forward current sample a b c 0.1 1 10 100 1 000 r l = 1 k ? 300 ? 100 ? i f = 5 ma, v ce = 5 v 5 0 ? 5 ? 10 ? 15 ? 20 ? 25 frequency response frequency f (khz) normalized gain gv typ. 1.2 1.0 0.8 0.6 0.4 0.2 0 10 2 10 3 10 4 10 5 i f = 5 ma, t a = 25?c i f = 5 ma, t a = 60?c i f = 20 ma, t a = 25?c 10 long term ctr degradation time (hr) ctr (relative value) 1 000 100 10 1 1 1 0 100 t d t s t f i f = 5 ma, v cc = 5 v, ctr = 228% t r load resistance r l (k ?) switching time vs. load resistance switching time t ( s) remark t he graphs indicate nominal characteristics. data sheet pn10610ej01v0ds 7 ps2801c-1,ps2801c-4
taping specifications (unit: mm) outline and dimensions (reel) packing: 3 500 pcs/reel 2.00.5 r 1.0 13.00.2 21.00.8 tape direction ps2801c-1-f3 ps2801c-1-f4 outline and dimensions (tape) 1.550.1 4.00.1 2.00.1 4.00.1 1.750.1 2.8 max. 7.550.1 0.3 7.50.1 16.00.3 2.850.1 2.30.1 1.5 +0.1 ?0 3302.0 1001.0 2.0 0.5 15.9 to 19.4 outer edge of flange 21.51.0 17.51.0 603 1c 603 1c 603 1c 603 1c 603 1c 603 1c 603 1c 603 1c 603 1c 603 1c data sheet pn10610ej01v0ds 8 ps2801c-1,ps2801c-4
tape direction ps2801c-4-f3 ps2801c-4-f4 outline and dimensions (reel) packing: 2 500 pcs/reel 2.00.5 r 1.0 13.00.2 21.00.8 outline and dimensions (tape) 1.550.1 12.00.1 2.00.1 4.00.1 1.750.1 16.00.3 8.30.1 2.8 max. 10.70.1 0.3 2.30.1 7.50.1 1.5 +0.1 ?0 3302.0 1001.0 2.00.5 15.9 to 19.4 outer edge of flange 21.51.0 17.51.0 data sheet pn10610ej01v0ds 9 ps2801c-1,ps2801c-4
notes on handling 1. recommended soldering conditions (1) infrared reflow soldering ? peak reflow temperature 260 c or below (package surface temperature) ? t i me of peak reflow temperature 10 seconds or less ? t i me of temperature higher than 220 c 60 seconds or less ? t i me to preheat temperature from 120 to 180 c 120 30 s ? number of reflow s t h ree ? f l ux rosin flux containing small amount of chlorine (t he flux w i th a maximum chlorine content of 0.2 w t % is recommended.) 12030 s (preheating) 220?c 180?c package surface temperature t (?c) time (s) recommended temperature profile of infrared reflow (heating) to 10 s to 60 s 260?c max. 120?c (2) wav e soldering ? t e mperature 260 c or below (molten solder temperature) ? t i me 10 seconds or less ? preheating conditions 120 c or below (package surface temperature) ? number of times one (allow ed to be dipped in solder including plastic mold portion.) ? f l ux rosin flux containing small amount of chlorine (t he flux w i th a maximum chlorine content of 0.2 w t % is recommended.) (3 ) solde r ing by solde r ing iron ? peak t e mperature (l ead part temperature) 350 c or below ? t i me (each pins) 3 seconds or less ? f l ux rosin flux containing small amount of chlorine (t he flux w i th a maximum chlorine content of 0.2 w t % is recommended.) (a) soldering of leads should be made at the poi nt 1.5 to 2.0 mm from the root of the lead (b) please be sure that the temperatur e of the package w oul d not be heated over 100 c data sheet pn10610ej01v0ds 10 ps2801c-1,ps2801c-4
(4) cautions ? fluxes avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. cautions regarding noise be aware that when voltage is applied suddenly bet ween the photocoupler?s i nput and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is wi thin the absolute maximum ratings. 3. measurement conditions of current transfer ra tios (ctr), which differ according to photocoupler check the setting values before use, since the forward current conditions at ctr measurement differ according to product. when using products other than at the specified forward current, the char acteristics curves may differ from the standard curves due to ctr value variations or the lik e. this tendency may sometimes be obvious, especially below i f = 1 ma. therefore, check the characteristi cs under the actual operating conditions and thoroughly take variations or the like into consider ation before use. usage cautions 1. protect against static electricity when handling. 2. avoid storage at a high te mperature and high humidity. data sheet pn10610ej01v0ds 11 ps2801c-1,ps2801c-4
the information in this document is current as of may, 2006. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec electronics data sheets or data books, etc., for the most up-to-date specifications of nec electronics products. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec electronics. nec electronics assumes no responsibility for any errors that may appear in this document. nec electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec electronics products listed in this document or any other liability arising from the use o f such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec electronics or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility o f the customer. nec electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec electronics endeavors to enhance the quality, reliability and safety of nec electronics products, customers agree and acknowledge that t h e possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. nec electronics products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to nec electronics products developed based on a customer- designated "quality assurance program" for a specific application. the recommended applications of an nec electronics product depend on its quality grade, as indicated below. customers must check the quality grade of each nec electronics product before using it in a particular application. the quality grade of nec electronics products is "standard" unless otherwise expressly specified in nec electronics data sheets or data books, etc. i f customers wish to use nec electronics products in applications not intended by nec electronics, they must contact an nec electronics sales representative in advance to determine nec electronics' willingness to support a given application. (note) ? ? ? ? ? ? m8e 02. 11-1 (1) (2) "nec electronics" a s used in this statement means nec electronics corporation and also includes its majority-owned subsidiaries. "nec electronics products" means any product developed or manufactured by or for nec electronics (as defined above). computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. " standard" : " special" : " specific" : data sheet pn10610ej01v0ds 12 ps2801c-1,ps2801c-4
caution gaas products this product uses gallium arsenide (g aas). gaas vapor and pow der are hazardous to human health if inhaled or ingested, so please observe the follow i ng points. ? follow related law s and ordinances w hen disposi ng of the product. if there are no applicable law s and/or ordinances, dispose of the product as recommended below . 1. commission a disposal company able to (w it h a license to) collect, transport and dispose of materials that contain arsenic and other such industrial w a ste materials. 2. exclude the product from general industria l w a ste and household garbage, and ensure that the product is controlled (as industrial w a ste subjec t to special control) up until final disposal. ? do not burn, destroy , cut, crush, or chemically dissolve the product. ? do not lick the product or in any w a y allow it to enter the mouth. 0604 nec compound semiconductor de vices hong k ong limited e-mail: contact@ncsd-hk.necel.com hong k ong head office tel: +852-3107-7303 f ax: +852-3107-7309 t aipei br anch office tel: +886-2-8712-0478 f ax: +886-2-2545-3859 k orea br anch office tel: +82-2-558-2120 f ax: +82-2-558-5209 nec electr onics (eur ope) gmbh http://www .eu.necel.com/ tel: +49-211-6503-0 f ax: +49-211-6503-1327 calif ornia eastern laboratories, inc. http://www .cel.com/ tel: +1-408-988-3500 f ax: +1-408-988-0279 compound semiconductor de vices division nec electr onics corporation url: http://www .ncsd.necel.com/ for fur ther inf ormation, please contact ps2801c-1,ps2801c-4
4590 p a t r ick hen r y drive san t a c l ara, ca 9505 4- 181 7 teleph o n e : ( 408) 919- 25 00 facsim ile: ( 408 ) 988- 027 9 subject: compliance with eu dire ctives cel certifies, to its kno w ledge, that semicondu ctor and laser products detailed below are compliant with the requirements of european union (eu) directive 2002/95/ec restriction on use of hazardous substances in electrical and electron ic equipment (rohs) an d the requir e ments of eu directive 2003/11/ec restriction o n penta and octa bde. cel pb-free products ha ve the same base part n u mber with a suffix added. the suffix ?a indicates that the device is pb-fre e. the ?az suffix is use d to designa te devices containing pb which are exempted from the requirement of ro hs directive (*). in all cases the de vices have pb-free terminals. all devices with these suffixes meet the require ments of the rohs directive. this statu s is based on cel?s understanding of t he eu directives and kn owledge of the materials that go into its pr oducts as of the date of disclo s ure o f this inform ation. re st rict e d s u bst a n c e per rohs con c e n tratio n limit per rohs (value s are n o t yet fixed) con c e n tratio n contai ned in cel devices - a - a z lead (p b) < 100 0 ppm not dete cted (*) mercury < 100 0 ppm not dete cted cadmi u m < 100 ppm not dete cted hexavale nt chromi um < 100 0 ppm not dete cted pbb < 1000 ppm not detec t ed pbde < 1000 ppm not detec t ed if you should have any additional q uestions reg a rding our d e vices and compliance t o environme n tal standards, p l ease do not hesitate to contact your local representative. important inf o rm ation and disclaimer: infor m ation provided b y cel on its w ebsite or in other communi cations concertin g the subs tance content of its pro ducts represents know ledge and b e lief as of t he date that it is provided. cel bases its know ledge a n d belief on informa t ion provided b y t h ird parties and make s no representa t ion or w a rran t y a s to the accurac y of such information. efforts are u nder w a y to b e tte r integrate informa t ion from third pa rties. cel has ta ken and cont inue s to take reasona ble steps to provide repr esentative and ac cur a te information but ma y not h a ve conducted destructive testing or chemical analy s is on incoming ma terials and chemicals. cel and ce l suppliers consid er certain inform ation to be pro p ri etar y , and thus c as numbers and other limited information ma y not be availab le for release. in no event shall cel?s liability ari s ing out of such information e x cee d the total purch ase price of the cel part ( s) at issue s old by cel to customer on an annual basis. see cel te rms and conditions f o r additional cl arification of w a rran t ies and liability .

▲Up To Search▲

Price & Availability of PS2801C-1-F3-A

	To Download PS2801C-1-F3-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .